Although calcium silicate board is fire-proof, moisture-proof and mildew-proof, in order to prolong its service life, what needs to be paid attention to during storage and handling?

1. Calcium silicate board can be placed outdoors, but be aware of rain, snow, and moisture;

2. If you put it outdoors, you need to put a waterproof and oil-proof cloth on it;

3. The calcium silicate board should be placed in a flat place to prevent the edges and corners from being damaged;

4. The Calcium silicate board cannot be placed upright when storing, only flat;

5. Because the weight of a single piece is relatively heavy, if you put it flat, you can’t put too many in one chop, and if you put too much, it will be too heavy, the bottom of board may be damaged;

6. It should be handled with care during the shipping process, and handled with care to avoid damage to the edges and corners, and to avoid damage due to excessive bending during handling;

7. When cutting, the operator needs to wear a mask to prevent inhalation of dust and should clean the dust after cutting.

8. In the handling project, it should be handled vertically on both sides, not horizontally, and beware of damage caused by excessive bending.

9. If you use a forklift to transport the calcium silicate board, be careful not to damage the board.

The above are the matters that should be paid attention to when handling and storing calcium silicate board. Compared with other products, calcium silicate board is still very simple, and it is generally not a big problem if you pay more attention to storage. Again, calcium silicate board can be used for ceiling and wall decoration, instead of gypsum board and cement board.